This remote is available from Conrad Electronics (www.conrad.de, order number 35 01 57 22). Before you can use this remote, you have to enter a device-specific code. I listed the device-codes I used to have all buttons available (except "record" for the TV-Device). For AUX and SAT you can also use VCR-device-codes, but not all work. TV for example only accepts TV-device-codes. In the picture above you can see how I named the buttons, and for each device I made a config file, named "RM200-device-name". If you want all four devices, just type "cat RM200-AUX RM200-TV RM200-VCR RM200-SAT > lircd.conf".
| Buttons | Device | |||
| AUX | TV | VCR | SAT | |
| Device-Code used | 0462 | 0101 | 0052 | 1493 |
| Additional
device-codes (not tested) |
- | 0231 1351 0251 0471 |
0462 0992 0132 |
- |
| 1 | X | X | X | X |
| 2 | X | X | X | X |
| 3 | X | X | X | X |
| 4 | X | X | X | X |
| 5 | X | X | X | X |
| 6 | X | X | X | X |
| 7 | X | X | X | X |
| 8 | X | X | X | X |
| 9 | X | X | X | X |
| 0 | X | X | X | X |
| off | X | X | X | X |
| vol-up | X | X | X | X |
| vol-down | X | X | X | X |
| mute | X | X | X | X |
| p2p | X | X | X | X |
| double | X | X | X | X |
| p-up | X | X | X | X |
| p-down | X | X | X | X |
| prev | X | X | X | X |
| next | X | X | X | X |
| play | X | X | X | X |
| pause | X | X | X | X |
| record | X | --- | X | X |
| stop | X | X | X | X |
| switch | X | X | X | X |
| 1-2 | X | X | X | X |